Toro 21462 Service Manual page 119

AWD Rear Transmission Installation (continued)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g359966
3. Install the transmission into the chassis with the belt.
4. Route the belt between the idler pulley and input pulley.
5. Install the rear height-of-cut plates.
6–16)
6. Install the belt guide guard onto the deck, secure with 2 (1/4–10 inch) screws.
Torque the screws to 2.82 ± 0.56 N • m (25 ± 5 in-lbs).
g352577
7. Install the baffle onto the deck, secure with a (1/4–10 inch) screw. Torque the
screw to 2.82 ± 0.56 N • m (25 ± 5 in-lbs).
Figure 142
Rear Height-of-Cut Installation (page
Figure 143
Page 7–15 Drive System: Service and Repairs