Electric Starter Installation (Electric Start Models Only) (continued)
Battery Assembly Replacement (Electric Start Models Only)
Battery Assembly Removal (Electric Start Models Only)
Electrical: Service and Repairs
g353635
6. Install the cable guide and electric starter to the curved handle, secure with
the NI lock nut and (7/16 inch) screw.
7. Install the cable guide onto the curved handle.
8. Install the 2 cable ties securing the electric starter wire harness to the curved
handle.
g353634
1. Park the machine on a level surface, stop the engine and wait for all moving
parts to stop.
2. Remove the grass bagger assembly if attached.
Figure 166
Figure 167
Page 8–10
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A