AWD Front Transmission Removal (continued)
AWD Front Transmission Installation
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g360056
13. Remove the belt from the transmission.
14. Remove the transmission from the chassis.
15. Inspect the belt for wear. Replace if necessary.
16. Inspect the blade driver pulley for wear. Replace if necessary.
17. Inspect the transmission pulley for wear. Replace the transmission if wear on
the transmission pulley exists.
1. Install the transmission into the chassis.
2. Install the belt onto the transmission pulley.
3. Install the transmission bracket onto the transmission, secure with 3 (#10–14)
screws. Torque the screws to 2.82 ± 0.56 N • m (25 ± 5 in-lbs).
Figure 149
Page 7–19
Drive System: Service and Repairs