Chute Assembly Removal (continued)
Chute Assembly Installation
Deck: Service and Repairs
g352578
13. Remove the chute from the deck.
1. Install the chute to the deck, secure with 4 (1/4–10 inch) screws. Torque the
screws to 3.39 ± 0.45 N • m (30 ± 4 in-lbs).
g352578
2. Install the belt guide guard onto the deck, secure with 2 (1/4–10 inch) screws.
Torque the screws to 3.39 ± 0.45 N • m (30 ± 4 in-lbs).
Figure 119
Figure 120
Page 6–22
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A