CHAPTER 10
Unpacking and Inspecting
Before You Unpack the CTP Platform
Related
Documentation
Unpacking the CTP Device
Copyright © 2015, Juniper Networks, Inc.
Before You Unpack the CTP Platform on page 47
Unpacking the CTP Device on page 47
Inspecting Platform Components and Accessories on page 48
If You Detect or Suspect Damage on page 48
Contacting Juniper Networks on page 49
Before you begin unpacking the device, be sure you have the following tools:
No. 2 Phillips screwdriver
Utility knife
Mechanical lift, or at least two people to assist in lifting
Unpacking the CTP Device on page 47
Inspecting Platform Components and Accessories on page 48
If You Detect or Suspect Damage on page 48
Contacting Juniper Networks on page 49
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For
your convenience, we recommend that you unpack the device in the location where you
want to install it.
WARNING:
For the larger CTP series devices, three people are required to
install the device in a rack: two to lift the device into position and one to screw
it to the rack.
47