Rep 4.5.5 Dc Fan Motor - Xerox DocuPrint P8e Service Manual

REP 4.5.5 DC Fan Motor

Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove the Face Up Cover (REP 4.1.1).
3 Open the Front Cover and remove the Print Cartridge (REP 4.5.1).
4 Remove the Front Cover (REP 4.1.2).
5 Remove the Rear Cover (REP 4.1.3).
6 Remove the Top Cover (REP 4.1.4).
7 Remove the Right Side Covers (REP 4.1.5).
8 Remove the Bottom Shield (REP 4.6.1).
9 Remove the Gear Bracket (REP 4.5.2).
10 Remove the Controller PWB (REP 4.6.3).
11 Remove the Engine Controller PWB (REP 4.6.2).
12 Remove the fan connector from CN 408 of the Joint PWB.
13 Remove the two screws securing the DC Fan Motor to the printer frame (Figure 4.5.5a).
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Xerox DocuPrint P8e Service Manual
Figure 4.5.5a. DC Fan Motor Removal.
P8e_400
7/98
4-25
13
Repair Procedures