Ptx10004 Field-Replaceable Units - Juniper PTX10004 Hardware Manual

Table 7: PTX10004 Router Physical Specifications (continued)
Description Weight
Chassis 240 lb (109 kg)
PTX10004-BASE3
303 lb (137 kg) with
AC or DC
pallet
configuration
Chassis 260 lb (117 kg)
PTX10004-PREM2
323 lb (147 kg) with
AC or DC
pallet
configuration
Chassis redundant 272 lb (123 kg)
PTX10004-PREM3
335 lb (152 kg) with
AC or DC
pallet
configuration
JNP10K-LC1201 line 31 lb (14.06 kg)
card
PTX10K-LC1202-36MR 21 lb (9.5 kg)

PTX10004 Field-Replaceable Units

Field-replaceable units (FRUs) are router components that you can replace at your site. The router uses
the following types of FRUs:
Hot-insertable and hot-removable—You can remove and replace these components without powering
off the router or disrupting the routing function.
Hot-pluggable—You can remove and replace these components without powering off the router, but
the routing function is interrupted until you replace the component.
Table 8 on page 36 lists the FRUs and their types for the PTX10004 routers.
Height Width
12.2 in. (33 cm) 17.4 in. (44.2 cm)
NOTE:
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
12.2 in. (33 cm) 17.4 in. (44.2 cm)
NOTE:
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
12.2 in. (33 cm) 17.4 in. (44.2 cm)
NOTE:
edges of the chassis
flange extend the
width to 19 in.
(48.3 cm).
12.2 in. (33 cm) 17.2 in. (43.7 cm)
1.9 in. (4.8 cm) 17.2 in. (43.68 cm)
Depth
35 in. (88.9 cm) with
JNP10K-PWR-AC2
The outer
power supplies
42.4 in. (107.7 cm)
with EMI door
35 in. (88.9 cm) with
JNP10K-PWR-DC2
The outer
power supplies
42.4 in. (107.7 cm)
with EMI door
35 in. (88.9 cm) with
JNP10K-PWR-AC2
The outer
power supplies
42.4 in. (107.7 cm))
with EMI door
21.3 in. (54.1 cm)
21.3 in. (54.1 cm)
35