Mx480 Field-Replaceable Units (Frus); Tools And Parts Required To Replace Mx480 Hardware Components; Table 95: Field-Replaceable Units; Table 96: Tools And Parts Required - Juniper MX480 Hardware Manual

Hide thumbs Also See for MX480:
Table of Contents

Advertisement

MX480 Universal Routing Platform Hardware Guide

MX480 Field-Replaceable Units (FRUs)

See Also

Tools and Parts Required to Replace MX480 Hardware Components

226
Field-replaceable units (FRUs) are router components that can be replaced at the
customer site. Replacing most FRUs requires minimal router downtime. The router uses
the following types of FRUs:
Hot-removable and hot-insertable FRUs—You can remove and replace these
components without powering off the router or disrupting the routing functions.
Hot-pluggable FRUs—You can remove and replace these components without powering
off the router, but the routing functions of the system are interrupted when the
component is removed.
Table 95 on page 226
lists the FRUs for the MX960 router. Before you replace an SCB or
a Routing Engine, you must take the host subsystem offline.

Table 95: Field-Replaceable Units

Hot-Removable and Hot-Insertable FRUs
Air filter
Craft interface
Backup Switch Control Board (SCB) (if
redundant)
Master Switch Control Board (SCB) (if
nonstop active routing is configured)
Backup Routing Engine (if redundant)
Master Routing Engine (if nonstop active
routing is configured)
Dense Port Concentrators (DPCs)
Flexible PIC Concentrators (FPCs)
Modular Port Concentrators (MPCs)
Modular Interface Cards (MICs)
PICs
AC and DC power supplies (if redundant)
Fan tray
MX480 Component Redundancy on page 34
Tools and Parts Required to Replace MX480 Hardware Components on page 226
To replace hardware components, you need the tools and parts listed in
Table 96 on page
226.

Table 96: Tools and Parts Required

Tool or Part
2.5-mm flat-blade (–) screwdriver
Hot-Pluggable FRUs
Master Switch Control Board (SCB) (if
nonstop active routing is not configured)
Master Routing Engine (if nonstop active
routing is not configured)
Switch Control Board (SCB) (nonredundant)
Routing Engine (nonredundant)
Solid-state drives (SSDs) of Routing Engines
Components
Alarm relay terminal block
Copyright © 2019, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents