ECS NEATSX User Manual page 73

Clearing The CMOS RAM
If incorrect setup values are recorded using the Quickset pro­
gram, it is possible the NEATsx will "hang", i.e., the screen image
will freeze and the system will not function even if you turn it off and
on again. If this happens you must use the following procedure to rec­
tify the problem. This procedure clears the incorrect information
stored m the CMOS RAM and allows you to re-enter the correct infor­
mation.
• To clear the CMOS RAM do the following:
• Turn the system off (power off)
• Press the <INS> key and turn the system back on (power on).
Hold down the <INS> key until the screen display appears and then
release it.
Having done this to clear the CMOS RAM, you must now re­
enter correct configuration values using the Quickset program as de­
scribed in the Software Setup section.
Installation & Operation
67