Table of Contents
Advertisement
1. Select I/O port address for EMS use
This item when selected will display the following list of port
addresses.
1 .208H/209H
2 .218H/219H
3 .258H/259H
4. 268H/269H
5. 2A8H/2A9H
6. 2B8H/2B9H
7 .2E8H/2E9H
Set I/O port Address, which is used for
the EMS page register I/O base Address.
If the EMS driver message does not have the right message or
lists no EMS available then the selected I/O address needs to be
changed. The default setting is number 1, port address 208H/209H. If
it does not work, select another and retry.
Software Setup
53
Advertisement
Table of Contents
