Specifications
AMI BIOS Setup Programs
The AMI BIOS firmware contains two hardware setup pro
grams. One is for recording your system configuration and the other is
for the NEAT chip set. They can be run after the system has been
turned on and the memory test has finished. On-screen messages
clearly explain what to do and how to use the first program. The sec
ond program also has instructions but is more complex to use.
The Setup Program
The hardware setup program records information about the
structure of your system. It asks you to enter the time, date and infor
mation about peripherals attached to the NEATsx. This includes dis
play type and disk drive types. The program prompts for the informa
tion it requires and its use is self-evident.
Software Specifications
41