ECS NEATSX User Manual page 56

Software Setup
2. SET MEMORY WATT STATE
Opening this section displays a list of available processor
speeds as shown below.
SYSTEM SPEED IS:
1 .12MHz
2 .16MHz
3. 20MHz
Select the appropriate speed for your system (16 or 20 Mhz),
then a wait-state selection list will appear. Lists for both 16 and 20
Mhz processor speeds are shown.
16MHz INTERLEAVE:
1.0 WAIT STATE, memory requirement is 100NS
2.1 WAIT STATE, memory requirement is 120NS
16MHz NON-INTERLEAVE:
3 .0 WAIT STATE, memory requirement is 60NS
4.1 WAIT STATE, memory requirement is 80NS
20MHz INTERLEAVE:
1.0 WAIT STATE, memory requirement is 80NS
2.1 WAIT STATE, memory requirement is 100NS
50