ECS NEATSX User Manual page 58

Software Setup
Disabling EMS returns you to the previous level. Enabling it
will cause another menu to appear. The next and more detailed menu
requests particular information required by the EMS setup. The next
menu is as follows:
Items 3 through 6 on the menu are the same, except that they
concern different memory pages. Each section has a default setting
that is automatically highlighted when opened. If the default setting
does not work, you can try another.
52
1. Select I/O port address for EMS use
2. Set starting Address for EMS use
3. Set EMS Page 0 Address Extension
4. Set EMS Page 1 Address Extension
5. Set EMS Page 2 Address Extension
6. Set EMS Page 3 Address Extension
7. Select total Memory Size for EMS