PowerSippy
The power supply connector on the NEATsx is made up of
two six-pin male components in a line. Dual connectors from the
power supply plug directly onto the connectors at the right rear of the
board.
The two female connectors from the power supply must be at
tached in the correct order. They can only plug in one way. Each has
multiple wires extending from it. The black wires on each connector
should be placed so that they are to the inside.
Keyboard
The NEATsx has a AT-compatible keyboard connector located
at the right rear of the board as noted in the board diagram. The con
necting jack from the keyboard plugs directly into it after the board
has been installed in the system unit case.
Hardware Setup
39