Set Temperature Fault Threshold; Set Beacon Control; Download Firmware; Refresh Data - Compaq Armada 6500 Hardware And Software Manual

Set Temperature Fault Threshold

From the Expanded Device View, click on the Service tab. In this view,
temperature fault threshold can be set for proper operation. The fault threshold
default is set at sixty degrees Celsius.
1. Enter a value between 0 and 60 in the threshold box.
2. Click Set.

Set Beacon Control

From the Expanded Device View, click on the Service tab. In the Service
dialog box, the Beacon Control can be set to force the power LED on the front
of the managed device to flash. The blinking LED is helpful to easily
distinguish a device requiring attention in a rack of similar devices.
Select the radio button for Off, Slow Blink, or Fast Blink. The beacon
control icon flashes according to the setting.

Download Firmware

Device View has the ability to download new firmware from a network-
attached server using the TFTP (Trivial File Transfer Protocol). The hub will
look at the IP address entered for the TFTP server for any new firmware and
automatically download it.

Refresh Data

From the Device View or Expanded Device View, you can choose Refresh
from the menu bar. The data for the device will be updated.

Check the HMU Version

To check the version number of the HMU that is running, from Expanded
Device View:
1. From the menu, select Help, About Compaq Hub 12 Management
Utilities.
2. Click OK.
Managing from Device View 3-11