2-22 Compaq Storage Hub 12 Management Utilities Hardware and Software User Guide
Managed Device Properties
Select the Managed Device in the SAN View tab window and right click.
Next, select Properties from the Context Menu that appears. The Managed
Device Properties dialog box, shown in the figure below, appears. This is a
read-only display that displays the properties of a managed device. It can be
used to enter the Location and Contact information for that device. This
information will appear on other displays once entered. This information can
also be entered from the Device View System ID Tab.
Figure 2-16. Managed Device Properties
NOTE: The Uplink Port is the port number for the currently viewed device connected to the
Downlink port of its parent. A proxy master does not have an Uplink Port—only slaves do.
For more information about Uplink and Downlink Ports, see Chapter 1 "Getting Started."