Loop Up Wait Time (Msec) - Compaq Armada 6500 Hardware And Software Manual

2-14 Compaq Storage Hub 12 Management Utilities Hardware and Software User Guide
Figure 2-10. Diagnostic Tools configuration tab

Loop Up Wait Time (msec)

This parameter is the period of time both diagnostics must wait while the
network is initializing. During this process, the network is expected to
complete initializing. If the loop takes too long, the diagnostics will assume
there is a problem and notification is triggered. Since some networks are larger
than others, this could be as long as several seconds, so if there is a large
percentage of false initialization problem indications, the parameters may need
to be increased.
Over-increasing this parameter will slow the actions of the diagnostics. The
longer the Loop Up Wait Time is set, the longer it will take the diagnostics to
work their way through their actions.