Compaq Armada 6500 Hardware And Software Manual page 71

Table 4-1
Error Messages
continued
Message
Bad Fan indicated for hub.
Bypass Port n?
Continuous FCAL (F7, F8, or
OLS) loop initialization
detected for loop
nnn.nnn.nnn.nnn.
Device is no longer in
topological view.
Discovering loop topology for
proxy IP address
nnn.nnn.nnn.nnn.
Description
Look for the source of the
problem by checking HMU View
levels (if managing multiple
devices) to determine which hub
level had the fault.
This is informational and
appears whenever a port is
selected for a manual Force
Bypass.
This is informational and is
displayed when LIP messages
are occurring on the proxy agent
at the IP address represented
here by
nnn.nnn.nnn.nnn.
You have double-clicked an
event in HMU.log and the device
is no longer present and
therefore cannot be displayed in
the Device Manager topological
view.
This message is informational
and is displayed during the
discovery process.
Troubleshooting 4-7
Action
For a 6-port or a 12-port
Compaq Storage Hub 12 Hub: Is
there an obstruction blocking
the air for the blowers? If so,
remove it. There is redundant
blower capability so the hub
could keep operating, but the
hub must be returned for blower
replacement as soon as
possible.
If none of the answers to the
above questions clears up the
problem, contact Customer
Service.
Choose OK or Cancel.
Use the HMU View Ports Tab to
begin systematically forcing a
bypass on each enabled port,
one at a time. When the
offending port is bypassed, the
proxy agent icon should return
to its green color representing
normal status.
Let the process run its course
and add the new device, or
select Cancel.
continued