1-10 Compaq Storage Hub 12 Management Utilities Hardware and Software User Guide
Subsequent HMU Startup
1. Select the Start button, Programs, and click Compaq Hub
Management Utilities (if there is a shortcut on your desktop,
double-click it). This time, a different initial HMU screen will appear,
shown in the figure below.
Figure 1-6. Initial screen on subsequent start up
2. Assuming a "Yes" response, HMU will use the old IP address as well as
the SNMP get and set Community Names stored from the last time you
used HMU. If you give an "No" answer, you must set Community
Names. To do so, see Appendix C, "Configuring the Management
Module."