Table 4-1
Error Messages
continued
Message
No data was saved in the
previous session.
No managed devices found.
No more ports available for
the selected device.
Not a managed device. Select
a managed device.
Please enter an integer
between 1 and n.
Description
This message displays when no
valid data existed at shutdown
from the previous HMU session.
This could happen if HMU is
shut down and there were no
devices in the hierarchical view.
This message displays when an
incorrect IP address was
entered or no device was found
at that IP address.
This message is informational.
This message displays if have
something other than an Inter-
Hub1 Communication Interface
(ICI) device is selected and some
action was attempted that it was
unable to perform.
This informational message
displays if a numeral were
entered that exceeded the
number of ports on the device.
Troubleshooting 4-9
Action
No action is required.
Verify the IP address and ping
the node for a response.
Delete an expendable device to
make room for the new device.
Consider expanding the Fibre
Channel capability to match the
growing need.
Select some other device that is
managed.
Enter an integer within the valid
range of ports on the device.
continued