2-8 Compaq Storage Hub 12 Management Utilities Hardware and Software User Guide
Network Traffic Tab
The second tab is the Network Traffic tab, shown in the figure below. This
window shows overall utilization and has a diagnostic function as well.
Figure 2-6. Network Traffic tab of Display Network View
Network Utilization Meter
The speedometer-like meter on the upper left corner of this window displays a
graphical presentation of the loop utilization that is updated every few
seconds. The Reset Utilization button, when clicked, causes the utilization to
be updated immediately.
The Loop Utilization Alert
The Loop Utilization Alert permits the user to set a percentage of utilization,
which sets off an alarm when that percentage is exceeded. This alert is in the
form of a Trap, which is sent to the Trap Management Station. The alarm set
point can be set by clicking on the Set Alarm Percentage button. From this
window, the alert can be disabled or the percentage of utilization can be set.