Factory Reset Via Flowsync; Factory Reset From The Watch - Polar Electro Unite User Manual

Factory reset via FlowSync

1. Go to flow.polar.com/start
computer.
2. Connect your watch to the computer's USB port.
3. Open settings in FlowSync.
4. Press the Factory Reset button.
5. If you use Flow app to sync, check the list of paired Bluetooth devices on your phone, and remove your watch from the
list if it's there.
Now you need to set up your watch again, either via mobile or computer. Just remember to use the same Polar account in
the setup you've used before resetting.

Factory reset from the watch

1. Press the button to access the main menu, swipe down to find Settings.
2. Choose Settings > General settings > About your watch.
3. Swipe all the way down to find Reset all data and settings.
4. First, tap Reset all data and settings.
5. Then tap to confirm the factory reset.
Now you need to set up your watch again, either via mobile or computer. Just remember to use the same Polar account in
the setup you've used before resetting.
and download and then install the Polar FlowSync data transfer software onto your
28