Table of Contents
Advertisement
Do not charge Polar products with a 9 volt charger. Using a 9 volt charger can damage your Polar product.
To charge with your computer, just plug your watch to your computer, and at the same time, you can have it synced it with
FlowSync.
1. To charge your watch, plug it into a powered USB port or a USB charger with the USB charging adapter that came in
the box. Align the pins of the USB charging adapter with the pins on the watch and snap the adapter into place. Also
make sure that you plug the USB charging adapter in the right way, i.e. the four pins on the Polar Unite USB charging
adapter must face the four pins in your computer's USB port or in the USB charger.
2.
Charging
appears on the display.
3. When the battery icon is full, the watch is fully charged.
Don't leave the battery fully discharged for a long period of time or keep it fully charged all the time, because it
may affect the battery life time.
BATTERY STATUS AND NOTIFICATIONS
Battery status symbol
The battery status symbol is shown when you turn your wrist to look at the watch or return to time view from the menu.
There is also a battery status icon in the
percentage.
Battery notifications
When the battery charge is low,
l
Charge before training
l
Low battery notifications during training:
Battery low
is shown when the battery charge is getting low. The notification is repeated if the charge gets too low for
l
measuring heart rate and GPS data and the heart rate measurement and GPS are switched off.
When the battery is critically low,
l
training data.
Quick settings
menu, which shows how much charge is left on the battery as a
Battery low. Charge
is shown if the charge is too low for recording a training session.
Recording ended
is show in time mode. It is recommended to charge the watch.
is shown. Your watch stops the training recording and saves the
80
Advertisement
Table of Contents
