Table of Contents
Advertisement
has already been paired. If you did the setup with a computer and would like to use your watch with Polar Flow app, please
pair your watch and phone as follows:
Before pairing a phone:
Download Flow app from the App Store or Google Play.
l
Make sure your phone has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l
Android users: make sure location is enabled for the Polar Flow app in the phone's application settings.
l
To pair a phone:
1. On your phone, open the Flow app and sign in with your Polar account, which you have created when setting up your
watch.
Android users: If you have several Flow app compatible Polar devices in use, make sure you have chosen
Polar Unite as the active device in the Flow app. This way the Flow app knows to connect to your watch.
In the Flow app, go to
2. On your watch, press and hold the button in time mode OR go to
and sync phone
and tap the display.
3.
Open Flow app and bring your watch close to phone
4. When the
Bluetooth Pairing Request
your phone matches the code shown on your watch.
5. Accept the Bluetooth pairing request on your phone.
6. Confirm the pin code on your watch.
7.
Pairing done
is displayed once the pairing is completed.
DELETE A PAIRING
To delete a pairing with a phone:
1. Go to
Settings > General settings > Pair and sync > Paired devices
2. Choose the device you want to remove by tapping its name on the display.
3.
Remove pairing?
4.
Pairing removed
is displayed when you are done.
UPDATING THE FIRMWARE
To keep your watch up to date and to get the best performance, always make sure to update the firmware whenever a new
version is available. Firmware updates are performed to improve the functionality of your watch.
Devices
and choose Polar Unite.
confirmation message appears on your phone, check that the code shown on
is displayed. Confirm by tapping the display.
Settings > General settings > Pair and sync > Pair
is displayed on your watch.
and tap the display.
20
Advertisement
Table of Contents
