Table 33: Ac Power Cord Specifications - Juniper EX4600 Series Hardware Manual

EX4600 Switch Hardware Guide

Table 33: AC Power Cord Specifications

Country/Region Electrical Specifications
Australia 250 VAC, 10 A, 50 Hz
China 250 VAC, 10 A, 50 Hz
Europe (except Italy, 250 VAC, 10 A, 50 Hz
Switzerland, and United
Kingdom)
Italy 250 VAC, 10 A, 50 Hz
Japan 125 VAC, 12 A, 50 Hz or 60 Hz
North America 125 VAC, 13 A, 60 Hz
South Korea 250 VAC, 10 A, 60 Hz
Switzerland 250 VAC, 10 A, 50 Hz
United Kingdom 250 VAC, 10 A, 50 Hz
Related
Documentation
80
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the EX4600
switch are in compliance.
Table 33 on page 80 lists AC power cord specifications provided for each country or
region.
AC Power Supply in an EX4600 Switch on page 23
General Safety Guidelines and Warnings on page 91
General Electrical Safety Guidelines and Warnings on page 119
Prevention of Electrostatic Discharge Damage on page 120
Plug Standards Juniper Model Number
AS/NZ 3109-1996 CBL-GP-C13-AU
GB 1002-1996 CBL-GP-C13-CH
CEE (7) VII CBL-GP-C13-EU
CEI 23-16/VII CBL-GP-C13-IT
JIS C8303 CBL-GP-C13-JP
CAN/CSA No. 49-92 CBL-GP-C13-US
KSC 8305; K60884-1 CBL-GP-C13-KR
SEV 1011 SEV 1991; EN CBL-GP-C13-
60320 C13
BS 1363/A CBL-GP-C13-UK
Graphic
Copyright © 2014, Juniper Networks, Inc.