EX4600 Switch Hardware Guide
* Optics, Fans and Power supply sold separately for EX4600-40F-S.
10
Figure 3: EX4600 Switch, FRU End
1—
Management panel
2—Fan modules
Figure 4: Management Panel Components
1
1—
Status LEDs
2—
em1–SFP management Ethernet port (C1)
Cage (socket for either 1 GbE copper SFP or
fiber SFP)
The management panel consists of the following components:
Status LEDs
ALM–Alarm or beacon
Unlit indicates the switch is halted or that there is no alarm.
Red indicates a major alarm.
Amber indicates a minor alarm.
SYS–System
Unlit indicates the switch is powered off or halted.
Solid green indicates that Junos OS for QFX Series is loaded on the switch.
Blinking green indicates that the switch is a participating member in a Virtual
Chassis.
MST–Master in a Virtual Chassis
Unlit indicates the switch is standalone or is a linecard member in a Virtual Chassis.
3—
Power supply units
3—
RJ-45 console port (C0N) and em0–RJ-45
(1000 Base-T) management Ethernet port
(C0)
4—
USB port
Copyright © 2014, Juniper Networks, Inc.