Table 9: Expansion Module Status Led - Juniper EX4600 Series Hardware Manual

Table 9: Expansion Module Status LED

LED State
ST Unlit
Green
Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
When the expansion module is inserted into the expansion bay, the chassis detects the
additional ports, recognizes them as 40 GbE ports, and lights the Status LED.
Table 9 on page 21 describes the Status LED on the QFX-EM-4Q expansion module.
Description
The expansion module is offline.
The chassis is powered off.
The expansion module is online and functioning normally.
Installing an Expansion Module in an EX4600 Switch on page 171
Removing an Expansion Module from an EX4600 Switch on page 173
Installing and Removing EX4600 Switch Hardware Components on page 167
Chapter 4: Modules
21