Unpacking An Ex4600 Switch; Table 35: Inventory Of Components Supplied With An Ex4600 Switch - Juniper EX4600 Series Hardware Manual

EX4600 Switch Hardware Guide

Unpacking an EX4600 Switch

Table 35: Inventory of Components Supplied with an EX4600 Switch

Component
Chassis with five fan modules and two power supplies.
Rear mounting blades
Front mounting brackets
Extension brackets
RJ-45 cable and RJ-45 to DB-9 adapter
Related
Documentation
140
The EX4600 switch chassis is a rigid sheet-metal structure that houses the hardware
components. A EX4600 switch is shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
CAUTION: EX4600 switches are maximally protected inside the shipping
carton. Do not unpack the switch until you are ready to begin installation.
To unpack a EX4600 switch:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box and verify the contents against the inventory included in
4.
the box. Table 35 on page 140
switch.
Pull out the packing material holding the switch in place.
5.
Verify the chassis components received:
6.
Two power supplies
Five fan modules
Save the shipping carton and packing materials in case you need to move or ship the
7.
switch later.
Mounting an EX4600 Switch in a Rack or Cabinet on page 141
Installing and Connecting an EX4600 Switch on page 139
lists the inventory of components supplied with a EX4600
Copyright © 2014, Juniper Networks, Inc.
Quantity
1
2
2
2
1