Table 19: Supported Dac And Dac Breakout Cables For The Ex4600 Switch - Juniper EX4600 Series Hardware Manual

Table 18: Supported Optical Transceivers for the EX4600 Switch (continued)
Part Number
QFX-SFP-10GE-USR
QFX-SFP-10GE-SR
QFX-SFP-10GE-LR
QFX-SFP-10GE-ER
QFX-SFP-10GE-ZR
QFX-QSFP-40G-SR4
QFX-QSFP-40G-ESR4
JNP-QSFP-40G-LR4

Table 19: Supported DAC and DAC Breakout Cables for the EX4600 Switch

Part Number
QFX-SFP-10GE-DAC-1M
Copyright © 2014, Juniper Networks, Inc.
Description
SFP+ module 10-Gigabit Ethernet Ultra Short
Reach (USR)
SFP+ module 10GBASE-SR, 10-Gigabit Ethernet
SFP+ module 10GBASE-LR, 10-Gigabit Ethernet
SFP+ module 10GBASE-ER, 10-Gigabit Ethernet
SFP+ module 10GBASE-ZR, 10-Gigabit Ethernet
QSFP+ module 40GBASE-SR4, 40-Gigabit
Ethernet
QSFP+ module 40GBASE-eSR4, 40-Gigabit
Ethernet
QSFP+ module 40GBASE-LR4, 40-Gigabit
Ethernet pluggable
Table 19 on page 47 describes the supported DAC and DAC breakout cables.
CAUTION: You can use DAC and DAC breakout cables purchased from a third
party at your own risk. If there is a problem with the cable or the transceiver,
support will not be provided. If you choose to use a third-party cable, it should
meet the specifications described in
Cables for the EX4600 Switch" on page
QSFP+ DAC Breakout Cables for the EX4600 Switch" on page
"Interface Specifications for QSFP+ DAC Cables for the EX4600 Switch" on
page 68.
Description
SFP+ 10-Gigabit Ethernet DAC cable assembly,
24 AWG
Chapter 8: Port and Interface Specifications
Maximum Distance Supported
850 nm for up to 10 m on OM1 grade fiber; 20
m on OM2 grade fiber; 100 m on OM3 grade fiber
850 nm for up to 300 m transmission on MMF
cable
1310 nm for up to 10 km transmission on MMF
cable
1550 nm for up to 40 km transmission on SSF
cable
1550 nm for up to 80 km transmission on SMF
cable
850 nm for up to 150 m transmission on MMF
cable
850 nm for up to 300 m transmission on MMF
cable
NOTE: If you are configuring a port as multiple
10-Gigabit Ethernet interfaces, you can use a
fiber breakout cable to distribute the interfaces
to up to four 10GBASE-SR SFP+ transceivers.
1310 nm for up to 10 km on SMF
"Interface Specifications for SFP+ DAC
60, "Interface Specifications for
Active/Passive Length
Passive 1 meter
65, and
47