Juniper EX4600 Series Hardware Manual page 184

EX4600 Switch Hardware Guide
Related
Documentation
166
Have one person support the weight of the switch while another person uses the
1.
screwdriver to remove the front mounting screws that attach the chassis mounting
brackets to the rack or cabinet.
Remove the EX4600 switch from the rack or cabinet.
2.
Use the screwdriver to remove the mounting screws that attach the mounting blades
3.
attached to the rear of the rack or cabinet.
Place the removed screws and mounting blades in a labeled bag. You will need them
4.
when you reinstall the chassis.
Transport the EX4600 switch to your desired new location.
5.
Mounting an EX4600 Switch in a Rack or Cabinet on page 141
Copyright © 2014, Juniper Networks, Inc.