Planning Power Requirements; Ac Power Specifications For An Ex4600 Switch; Ac Power Cord Specifications For An Ex4600 Switch; Table 32: Ac Power Specifications For An Ex4600 Switch - Juniper EX4600 Series Hardware Manual

CHAPTER 10

Planning Power Requirements

AC Power Specifications for an EX4600 Switch

Table 32: AC Power Specifications for an EX4600 Switch

Item
AC input voltage
AC input line frequency
AC input current rating
Typical power consumption: 230 W
Maximum power consumption: 365 W
Related
Documentation

AC Power Cord Specifications for an EX4600 Switch

Copyright © 2014, Juniper Networks, Inc.
AC Power Specifications for an EX4600 Switch on page 79
AC Power Cord Specifications for an EX4600 Switch on page 79
DC Power Specifications for an EX4600 Switch on page 81
Table 32 on page 79 describes the AC power specifications for an EX4600 switch.
AC Power Cord Specifications for an EX4600 Switch on page 79
AC Power Supply in an EX4600 Switch on page 23
General Safety Guidelines and Warnings on page 91
General Electrical Safety Guidelines and Warnings on page 119
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
Specification
Operating range: 100–240 VAC
50–60 Hz
4.5 A at 100–120 VAC
2.0 A at 200–240 VAC
79