Grounding Cable And Lug Specifications For An Ex4600 Switch; Figure 14: Dc Power Supply Faceplate In Ex4600 Switches - Juniper EX4600 Series Hardware Manual

EX4600 Switch Hardware Guide
Related
Documentation

Grounding Cable and Lug Specifications for an EX4600 Switch

26

Figure 14: DC Power Supply Faceplate in EX4600 Switches

1— Feed B input terminals
2— Feed A input terminals
3— Terminal block
4— Ejector lever
To avoid electrical injury, carefully follow instructions in
EX4600 Switch" on page 168
on page 169.
DC Power Supply LEDs on an EX4600 Switch on page 195
Management Panel of an EX4600 Switch on page 9
Field-Replaceable Units in an EX4600 Switch on page 6
DC Power Specifications for an EX4600 Switch on page 81
Prevention of Electrostatic Discharge Damage on page 120
Connecting DC Power to an EX4600 Switch on page 149
For installations that require a separate grounding conductor to the chassis, the switch
must be adequately grounded before power is connected to ensure proper operation
and to meet safety and electromagnetic interference (EMI) requirements. To ground an
EX4600 switch, connect a grounding cable to earth ground and then attach it to the
chassis grounding points.
5
5— ESD grounding point
6— Fault LED
7— Output LED
8— Input LED
"Installing a Power Supply in an
and "Removing a Power Supply from an EX4600 Switch"
Copyright © 2014, Juniper Networks, Inc.