Cable Specifications; Network Cable Specifications For Ex4600 Switches; Cable Specifications For Console And Management Connections For The Ex4600; Table 29: Cable Specifications For Switch-To-Management-Device - Juniper EX4600 Series Hardware Manual

CHAPTER 9

Cable Specifications

Network Cable Specifications for EX4600 Switches

Table 29: Cable Specifications for Switch-to-Management-Device Connections
Ports on EX4600 Cable
Switches Specification
RJ-45 Console RS-232 (EIA-232)
( ) port serial cable
CON
Management Category 5 cable
( ) Ethernet or equivalent
MGMT
port suitable for
(10/100/1000) 1000BASE-T
operation
Copyright © 2014, Juniper Networks, Inc.
Network Cable Specifications for EX4600 Switches on page 73
Cable Specifications for Console and Management Connections for the
EX4600 on page 74
Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion on page 74
Calculating the EX Series Switch Fiber-Optic Cable Power Budget on page 76
Calculating the EX Series Switch Fiber-Optic Cable Power Margin on page 76
EX4600 switches have interfaces that use various types of network cables.
Table 29 on page 73 lists the specifications for the cables that connect the console (
and management ( MGMT
NOTE: The EX4600 can be configured with SFP management ports that
support 1000BASE-SX transceivers. See
SFP+, and QSFP+ Transceivers for the EX4600 Switch" on page 49
information about the fiber-optic cables required for use with these
transceivers.
Cable/Wire
Supplied
One 7-foot
(2.13-meter)
length RJ-45 patch
cable and RJ-45 to
DB-9 adapter
One 7-foot
(2.13-meter)
length RJ-45 patch
cable
) ports to management devices.
Switch
Maximum Length Receptacle
7 ft (2.13 m) RJ-45
328 feet RJ-45
(100 meters)
"Interface Specifications for SFP,
Additional
Information
"Connecting an EX
Series Switch to a
Management
Console" on
page 153
Connecting an EX
Series Switch to a
Network for
Out-of-Band
Management
)
CON
for more
73