Qfx-Em-4Q; Figure 9: Ex4600-Em-8F Faceplate And Leds; Figure 10: Qfx-Em-4Q Faceplate And Leds; Table 8: Ex4600-Em-8F Status Led - Juniper EX4600 Series Hardware Manual

EX4600 Switch Hardware Guide

Table 8: EX4600-EM-8F Status LED

LED State
ST Unlit
Green

QFX-EM-4Q

20

Figure 9: EX4600-EM-8F Faceplate and LEDs

1
1— Expansion module status LED
When the expansion module is inserted into the expansion bay, the chassis detects the
additional ports, recognizes them as 10GbE ports, and lights the Status LED.
Table 8 on page 20 describes the Status LED on the EX4600-EM-8F.
Description
The expansion module is offline.
The chassis is powered off.
The expansion module is online and functioning normally.
The QFX-EM-4Q, provides 4 additional 40-Gigabit Ethernet QSFP+ ports to one of the
bays in the EX4600 switch. Port 0 and port 2 can be used for port channelization by
configuring the system mode for 104 port mode.
Figure 10 on page 20 shows the QFX-EM-4Q ports and LEDs.

Figure 10: QFX-EM-4Q Faceplate and LEDs

1— Expansion module status LED
2
2
2— SFP+ port LEDs
2— QSFP+ port LEDs
Copyright © 2014, Juniper Networks, Inc.