Juniper EX4600 Series Hardware Manual page 90

EX4600 Switch Hardware Guide
Table 28: Interface Specifications for Active Copper QSFP+ DAC Cables (continued)
Product Number Specifications
JNP-QSFP-DAC-10MA Rate
Connector type
Supply voltage
Power consumption
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Related
Documentation
72
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the EX4600 Switch
on page 49
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the EX4600 Switch
on page 49
Interface Specifications for QSFP+ DAC Breakout Cables for the EX4600 Switch on
page 65
Installing a Transceiver in an EX Series Switch on page 182
Removing a Transceiver from an EX Series Switch on page 179
40-Gbps full-duplex serial transmission
Copper pigtail
3.3 V
0.058 W
° °
–40 C to 85 C
Twinax
28 AWG
0.3 in. (0.762 cm)
100 ohms
2 % maximum
4.3 nsec/m
10 m (32.8 ft)
Copyright © 2014, Juniper Networks, Inc.