Access Port And Uplink Port Leds On An Ex4600 Switch; Figure 40: Management Port Leds On An Ex4600 Switch; Table 37: Management Port Leds On An Ex4600 Switch - Juniper EX4600 Series Hardware Manual

Table 37: Management Port LEDs on an EX4600 Switch

LED Color
Link/Activity Unlit
Green
Status Unlit
Green
Amber
Related
Documentation

Access Port and Uplink Port LEDs on an EX4600 Switch

Copyright © 2014, Juniper Networks, Inc.

Figure 40: Management Port LEDs on an EX4600 Switch

1
1— Status LEDs
2— em1–SFP management Ethernet port (C1)
Cage (socket for either 10/100/1000 Base-T
RJ45 SFP or 1GbE fiber SFP)
Table 37 on page 191 describes the management port LEDs.
State
Off
On steadily
Blinking or flickering
Off
On steadily
On steadily
Management Panel of an EX4600 Switch on page 9
Connecting an EX4600 Switch to a Network for Out-of-Band Management on page 155
The Link/Activity and Status LED configuration for an EX4600 switch uses bi-colored
LEDs. The two figures in this topic show the location of those LEDs:
Chapter 23: Viewing System Information
3— em0–RJ-45 (10/100/1000 Base-T)
management Ethernet port (C0). The RJ-45
console port (CON) is above C0.
4— USB port
Description
No link is established, there is a fault, or the link is down.
A link is established, but there is no link activity.
A link is established, and there is link activity.
Either the port speed is 10 M or the link is down.
The port speed is 1000 M.
The port speed is 100 M.
191