Rack And Cabinet Requirements; Rack Requirements For An Ex4600 Switch; Table 14: Rack Requirements For The Ex4600 Switch; Ex4600 Switch - Juniper EX4600 Series Hardware Manual

CHAPTER 7

Rack and Cabinet Requirements

Rack Requirements for an EX4600 Switch

Table 14: Rack Requirements for the EX4600 Switch

Rack Requirement Guidelines
Rack type Use a four-post rack that provides bracket holes or hole patterns spaced at 1 U (1.75 in. or 4.45 cm)
increments and that meets the size and strength requirements to support the weight.
A U is the standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment (document
number EIA-310–D) published by the Electronics Industry Association.
Mounting bracket hole The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so that the switch can be
spacing mounted in any rack that provides holes spaced at that distance.
Copyright © 2014, Juniper Networks, Inc.
Rack Requirements for an EX4600 Switch on page 39
Cabinet Requirements for an EX4600 Switch on page 40
Clearance Requirements for Airflow and Hardware Maintenance for an EX4600
Switch on page 41
EX4600 Switches are designed to be installed on four-post racks.
Rack requirements consist of:
Rack type
Mounting bracket hole spacing
Rack size and strength
Table 14 on page 39 provides the rack requirements and specifications for the EX4600

Switch.

39