Selecting Run Mode - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Cautions
 Once the execution file has been selected, it remains effective until another file is
selected. If a compile error has occurred, however, selection of the execution file
is canceled.
 To reset the execution environment without changing the execution file, execute
[RESET] and [PROG].
 This operation cannot be performed while running a program.
7.3

Selecting Run Mode

Functional Explanation
Changes over the run mode of automatic operation.
Operating Procedure
Step 1: Calling the Mode Setting keys
Press the [MODE] key. The [CONT], [CYCLE], [SEG] and [STEP] keys are displayed on
the menu of the key sheet.
Step 2: Selecting a mode to switch
Select a mode to switch from the [CONT], [CYCLE], [SEG] and [STEP] keys, and then
press the [EXE] key.
When a mode is switched, it is displayed in the MODE field on the status bar at the
bottom of the screen.
TP3000
7-6
STE 85412