Toshiba TS3000 Series Instruction Manual page 95

series Robot Controller
Step 6: Execution of replacement
To execute the replacement of the replacement candidate, press the [EXE] key.
Step 7: Quitting the replace function
To finish moving replacement candidates, press a key other than the up and down
cursor keys.
The cursor appears at the left of the replacement candidate and the replace function
finishes.
Caution
 Neither kanji nor kana characters can be replaced in a file containing kanji and
kana characters in a program.
4.15.6 Calling a Subprogram or Label
Functional Explanation
Moves the cursor to the beginning of a subprogram or label in the program.
After moving the cursor to the beginning of a subprogram or label, it is possible to return
to the calling source.
Operating Procedure
Step 1: Calling the [CALL] and [CALL RET] keys
displayed on the key sheet.
TP3000
4-29
STE 85412