Teaching Operation; Selecting The Teaching Mode - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Section 3

Teaching Operation

3.1

Selecting the Teaching Mode

Functional Explanation
Changes over to the TEACHING mode in which the robot is manually guided, points are
taught, files are operated and the system is controlled.
Operating Procedure
Step 1: Teaching mode selection.
Change over the master mode select switch on the control panel to "TEACHING".
TS3000
Select "TEACHING."
– 3-1 –
TP3000 OPERATOR'S MANUAL
TSL3000
STE 85412