Configuration Of The Data Editor - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Cautions
 If a file with large memory size is specified, it will take a long time until the
progress bar is shown and editing is enabled.
Please wait until the progress bar disappears.
 Even if the Master Mode key switch is changed to "TEACHING" during editing, the
editing mode does not finish.
5.2

Configuration of the Data Editor

The configuration of the data editor screen is shown below.
Data Editor Screen and Key Sheet
1
3
5
6
The data editor is configured to mainly edit position data, coordinate data, and load data.
Press the [POINT] key to edit position data, the [TRANS] key to edit coordinate data,
and the [PYLD] key to edit load data.
TP3000
Description of Display
 Data Edit screen
 Editing data item
2
POINT: Position data
TRANS: Coordinate data
PYLD: Load data
 Command line
4
 Data count
 Program editing function
menus
 Text entry operation keys
5-4
STE 85412