Toshiba TS3000 Series Instruction Manual page 94

series Robot Controller
TP3000
* If you are not selecting a replacement candidate in the program, press the [CHNG]
key and then immediately press the [CHNG SET] key.
Step 3: Extracting a replacement candidate
Edit the search character string by editing the command line. Once the character string
you want to search has been determined, press the [EXE] key.
Step 4: Editing the replacing character string
Press the [BEF/AFT] key on the top key sheet.
The cursor moves to the command line (AFTER). Edit the replacing character string.
Once the replacement candidate and the replacing character string have been
determined, press the [EXE] key.
Step 5: Moving a replacement candidate
When there are replacement candidates, they are displayed in different colors. (If there
is no replacement candidate, the function will be cleared.)
Move the replacement candidate using the up and down cursor keys.
STE 85412
4-28