Speed Override - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Caution
 The "startup command" external control signal is inoperative in the internal
automatic operation mode.
 While in the internal automatic operation mode, it is not possible to execute [RUN]
from the teach pendant
8.3

Speed Override

Functional Explanation
Sets the speed override for automatic operation.
When setting the programmed speed as 100%, this function is used to apply an
additional override.
The selections on the override key sheet are changed to the [10], [25], [50], [75] and
[100] keys at the time of internal automatic operation.
Operating Procedure
Step 1: Selection of the speed override function
Press the [OVRD] key. The [10], [25], [50], [75] and [100] keys are displayed on the
keyboard.
The succeeding operation is the same as that of the test operation (Section 7).
TP3000 OPERATOR S MANUAL
8-5
STE 85412