File Copy Between Ram And Usb - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Step 4: Renaming a parameter file
When the file to be renamed is a parameter file, a confirmation message appears again
after the [EXE] key operation in Step 3.
To execute parameter file renaming, press the [EXE] key.
To cancel file renaming, press the [ESC] key.
Cautions
 It is not possible to rename the file being selected as the execution file.
 If this happens, the error message "File already selected" is displayed and key
entry is prompted.
 It is not possible to rename a file to the file name being selected as the execution
file.
 If this happens, the error message "File already selected" is displayed and key
entry is prompted.

10.6 File Copy between RAM and USB

Functional Explanation
Copies files between the RAM drive and the USB drive (TS3000 folder).
Operating Procedure
Step 1: Press the [File Transfer] key. The screen is split into two and a list of files in
the RAM driver and that in the USB drive are displayed. The [  SET] and [ALL] keys
are displayed on the key sheet.
TP3000 OPERATOR S MANUAL
10-10
STE 85412