Selecting And Clearing Tool Coordinates - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Cautions
 When coordinates are selected during position data editing, these coordinates will
automatically be set as work coordinates.
 The work coordinates which have been set up are maintained regardless of the
execution of [SAVE] or [NO SAVE] to files.
 If the data editor is closed and then started, work coordinates will be cleared.
 If a program is selected in the test operation mode, work coordinates will
automatically be cleared.
5.5.3

Selecting and Clearing Tool Coordinates

Functional Explanation
Sets up the specified coordinates as the tool coordinates. Also clears the tool
coordinates that have been set up.
Operating Procedure
Step 1: Call the Tool Coordinate Setup key.
Press the [JOG TRANS] key which is displayed on the Function menu during coordinate
data editing.
The [TOOL] key is displayed on the key sheet.
TP3000
5-29
STE 85412