Selecting External Automatic Operation Mode - Toshiba TS3000 Series Instruction Manual

series Robot Controller
9.1

Selecting External Automatic Operation Mode

Functional Explanation
Selects the external automatic mode where you can execute a program by external
control signals or commands given from the host computer.
Operating Procedure
Step 1: Selection of external automatic mode.
Change over the master mode switch on the control panel to
TS3000
The functions that can be used from the teaching pendant in the external automatic
mode are listed in the table below.
The basic operation of each of these functions is the same as those in the test
operation mode. In this section, only the differences from the test operation mode are
explained.
For more detailed operation procedure of each function, please see Section 7, "Test
Operation".
Menu
* [OVRD]
[LDISP]
[WATCH]
[STOP]
[BREAK]
Select EXT
Description of Operation
Performs override settings.
Displays an execution line.
Global variable monitor
Stops a program.
Halts a program.
9-2
TP3000 OPERATOR S MANUAL
TSL3000
STE 85412