series Robot Controller
Step 3: Execution of RUN
Press the [RUN] key on the key sheet.
When the [RUN] key is pressed, the key sheet changes to the top key sheet of the
TEACHING mode.
JOG Key Sheet
Press the EXE key. When program execution has started, the STOP switch LED on
the control panel goes out and the RUN switch LED goes on.
During execution, "RUN" is displayed in the STAT field on the status bar.
RUN SW
TS3000/TS3100 Control Panel
* The TSL3000 does not have a control panel.
TEACHING Mode Top Key Sheet
STOP SW
7-13
TP3000
STE 85412