Discard Changes And Quit - Toshiba TS3000 Series Instruction Manual

series Robot Controller

5.7.10 Discard Changes and Quit

Functional Explanation
Discards edited data and quits the program editor.
Operating Procedure
Step 1: Calling the [NO SAVE] key
Press the [FILE] key. The [SAVE] and [NO SAVE] keys are displayed on the key sheet.
Step 2: Discarding edited data and quitting the program editor
Press the [NO SAVE] key. A confirmation message for discarding edited data appears
on the command line.
To execute [NO SAVE], press the [EXE] key. Edited data is discarded and the program
editor quits.
If the [ESC] key is pressed while a confirmation message is being displayed, [NO
SAVE] is canceled and data editing can be continued.
Caution
 In case the data editing function was started from the program editing function, the
program editor will also quit after saving the program in a file.
TP3000
5-55
STE 85412