Toshiba TS3000 Series Instruction Manual page 229

series Robot Controller
To overwrite the file, press the [EXE] key. To not overwrite the file, press the [ESC] key.
When copying multiple files and files having the same names already exist at the copy
destination, a message stating such will be displayed for each of duplicate file names.
Related Function
<Select directory files collectively>
Press the [ALL] key. All the files at the copy source are selected.
To copy all the files at a time, press the [EXE] key.
Cautions
 If there is no "TS3000" folder in the USB drive when the USB drive is selected in
each operation, the error message "USB NOT FOUND" is displayed and it is not
possible to move to the File Transfer screen.
 If the [RAM  USB] key is pressed when a USB flash memory is not inserted into
the controller, a list of files in the USB drive cannot be displayed. Even if a USB
flash memory is inserted into the controller in this state, a list of files in the USB
drive will not be displayed. To display it, press the [ESC] key once to cancel the
File Copy function between RAM and USB, and then press the [RAM  USB]
again.
TP3000 OPERATOR S MANUAL
10-13
STE 85412