Main Power And Servo Power Of The Ts3000 Controller; Control Panel (Ts3000) - Toshiba TS3000 Series Instruction Manual

series Robot Controller
2.2

Main Power and Servo Power of the TS3000 Controller

2.2.1

Control Panel (TS3000)

The control panel of the TS3000 controller is shown in the figure below.
(1) Key switch
(2) SERVO ON switch/LED
(3) SERVO OFF switch/LED
(4) RUN switch/LED
(5) STOP switch/LED
(6) SELECT switch/LED
INTERNAL
EXT TEACHING
POWER
LINE
USER
ALARM
: Used to select the operation master mode.
: Used to turn ON the servo power.
: Used to turn OFF the servo power.
: Used to start the internal automatic mode operation.
Used to stop the operation after the active block has
been executed.
: Every time this switch is pressed, content shown on
the display changes.
LINE:
USER:
TP3000 OPERATOR S MANUAL
EMERGENCY
SERVO SERVO UF1
ON OFF
RUN STOP UF2
SELECT
TP
No. of program execution steps.
A value set by PLCDATAW1 of the
program.
2-2
STE 85412